Day: February 11, 2017

CNC: Wire Limit Switches

I’m finishing my CNC building and now I need to wire the Limit Switches (End-stops).

My CNC initially will be controlled by TB6560-4V3 board, then searching for more information about how to connect the end-stops I found this nice tutorial:

http://www.hobbycncaustralia.com/Instructions/iI19wirelimit.htm

Their TB6560 board is a little-bit different from mine (they are using older model), but almost all (if not all) information could be applied to my board as well.

So, let me go ahead and stops these motors at its end!