Updating the LPC-Link of LPCXpresso LPC1115

This is the dmesg log from original NXP LPCXpresso LPC1115:

[40022.046785] usb 3-3: new high-speed USB device number 11 using xhci_hcd
[40022.175426] usb 3-3: New USB device found, idVendor=0471, idProduct=df55
[40022.175433] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0

After downloading the “Installer_LPCXpresso_7.6.2_326_Linux-x86.tar.gz” and installing it (read the INSTALL.txt) execute the firmware update using dfu-util:

$ dfu-util -d 0x471:0xdf55 -c 0 -t 2048 -R -D LPCXpressoWIN.enc

dfu-util 0.8

Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2014 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to dfu-util@lists.gnumonks.org

dfu-util: Invalid DFU suffix signature
dfu-util: A valid DFU suffix will be required in a future dfu-util release!!!
Deducing device DFU version from functional descriptor length
Opening DFU capable USB device...
ID 0471:df55
Run-time device DFU version 0100
Claiming USB DFU Runtime Interface...
Determining device status: state = dfuIDLE, status = 0
dfu-util: WARNING: Runtime device already in DFU state ?!?
Claiming USB DFU Interface...
Setting Alternate Setting #0 ...
Determining device status: state = dfuIDLE, status = 0
dfuIDLE, continuing
DFU mode device DFU version 0100
Copying data from PC to DFU device
Download	[=========================] 100%        29192 bytes
Download done.
state(8) = dfuMANIFEST-WAIT-RESET, status(0) = No error condition is present
Done!
dfu-util: can't detach
Resetting USB to switch back to runtime mode

Then reset the board and you will see it:

[40022.046785] usb 3-3: new high-speed USB device number 11 using xhci_hcd
[40022.175426] usb 3-3: New USB device found, idVendor=0471, idProduct=df55
[40022.175433] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[40100.106369] usb 3-3: USB disconnect, device number 11
[40100.562631] usb 3-3: new high-speed USB device number 12 using xhci_hcd
[40100.691493] usb 3-3: New USB device found, idVendor=1fc9, idProduct=0009
[40100.691500] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[40100.691504] usb 3-3: Product: LPC-Link Probe v1.3
[40100.691506] usb 3-3: Manufacturer: Code Red Technologies
[40100.691509] usb 3-3: SerialNumber: WIN64HS12
[40130.923946] usb 3-3: USB disconnect, device number 12
[40133.320956] usb 3-3: new high-speed USB device number 13 using xhci_hcd
[40133.449483] usb 3-3: New USB device found, idVendor=0471, idProduct=df55
[40133.449490] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s